Link - Right Toe

Raise and support vehicle. Refer to STANDARD PROCEDURE .

Fig 1: Tire And Wheel Mounting
Courtesy of CHRYSLER LLC
Remove wheel mounting nuts (3), then rear tire and wheel assembly (1).

Fig 2: WSS Routing Along Left Toe Link
Courtesy of CHRYSLER LLC
If equipped, remove wheel speed sensor cable (2) from toe link.

Fig 3: Rear Toe Adjustment Bolt Nut
Courtesy of CHRYSLER LLC
While holding toe adjustment cam bolt from rotating, remove nut (3) securing toe link at crossmember (1).

Fig 4: Toe Link Mounting
Courtesy of CHRYSLER LLC
Slide cam bolt (2) rearward out of crossmember and link (1).
Remove mounting bolt (3) and nut at knuckle.
Remove toe link (1).