Hub And Bearing - AWD

Raise and support vehicle. Refer to STANDARD PROCEDURE .

Fig 1: Tire And Wheel Mounting
Courtesy of CHRYSLER LLC
Remove wheel mounting nuts (3), then tire and wheel assembly (1).

Fig 2: Locating Axle Shaft Hub Nut
Courtesy of CHRYSLER LLC
While a helper applies brakes to keep hub from rotating, remove hub nut (1) from the axle half shaft (2).
Access and remove front brake rotor. Refer to REMOVAL .

Fig 3: Locating Halfshaft at Hub/Bearing Assembly
Courtesy of CHRYSLER LLC
Remove four bolts (3) fastening hub and bearing (2) to knuckle.
Slide hub and bearing (2) off axle half shaft (1) and knuckle.