Bar - Stabilizer - AWD

Raise and support vehicle. Refer to STANDARD PROCEDURE .
Remove belly pan. Refer to REMOVAL .

Fig 1: Link Ball Joint At Stabilizer Bar
Courtesy of CHRYSLER LLC
On each side of vehicle, remove nut (5) fastening stabilizer link (3) to stabilizer bar (4). Slide link ball joint stem (1) from bar.

Fig 2: Stabilizer Bar Bushing & Retainer
Courtesy of CHRYSLER LLC
On each side of vehicle, remove bolts (2) fastening stabilizer bar isolator retainer (3) in place.
Remove stabilizer bar with isolators and retainers from vehicle.
On each side of bar, remove retainers (3) from around stabilizer bar isolators (1).
Utilizing slit, remove each isolator (1) from stabilizer bar (2).