Clock - Service Information: Removal: Clock

Fig 1: Instrument Panel Center Bezel

Courtesy of CHRYSLER LLC

1. Disconnect and isolate the battery negative cable.
2. Remove the Instrument Panel Center Bezel. Refer to REMOVAL .
   Fig 2: Retaining Screws

   Courtesy of CHRYSLER LLC
3. Remove the two retaining screws (1) holding the clock to the rear of the I/P Center Bezel.
   Fig 3: Locating Sockets

   Courtesy of CHRYSLER LLC
4. To replace the clock illumination lamps (1), turn sockets (1) counterclockwise to remove lamp and socket (1).