Service Information: Removal

Fig 1: Instrument Panel Center Bezel

Courtesy of DAIMLERCHRYSLER CORP.

Disconnect and isolate the battery negative cable.
Remove the Instrument Panel Center Bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - REMOVAL) .

Fig 2: Clock Retaining Screws
Courtesy of DAIMLERCHRYSLER CORP.
Remove the two retaining screws (1) holding the clock to the rear of the I/P Center Bezel.

Fig 3: Clock Illumination Lamps
Courtesy of DAIMLERCHRYSLER CORP.
To replace the clock illumination lamps (1), turn sockets (1) counterclockwise to remove lamp and socket (1).