LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2006 >> Magnum SXT, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Clock (Service Information) >> Service Information >> Installation

Service Information: Installation

Fig 1: Clock Illumination Lamps
GC0015722Courtesy of DAIMLERCHRYSLER CORP.
  1. Place lamp and sockets (1) into opening and turn clockwise till detent is felt.
    Fig 2: Clock Retaining Screws
    GC0015723Courtesy of DAIMLERCHRYSLER CORP.
  2. Place the clock into bezel opening and then install the two retaining screws (1).
    Fig 3: Instrument Panel Center Bezel
    GC0015720Courtesy of DAIMLERCHRYSLER CORP.
  3. Install the Instrument Panel Center Bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - INSTALLATION) .
  4. Connect the battery negative cable.
  5. Adjust clock to proper time.
scientia non olet · About LEMON Manuals