Diagnosis And Testing - Transmission Range Indicator: Notes

The transmission range sensor (on the valve body) sends a signal to the PCM on the position of the transaxle manual valve lever. The PCM receives the switch signal and processes the data. The PCM sends the Shift Lever Position (SLP) information to the BCM via the communication bus. The BCM then outlines the appropriate transmission range indicator in the instrument cluster.

If a problem arises with the transmission range indicator, refer to TRANSMISSION RANGE INDICATOR TEST  , and the proper Body Diagnostic Procedures manual if the problem still exists.

To replace the transmission range indicator (Refer to CENTER CONSOLE BEZEL ).