Instrument Panel Right Lower Trim: Installation
WARNING:
Follow all Warnings for airbag component service (Refer to RESTRAINTS
).
- Install five screws to instrument panel right lower trim.
- Install three screws retaining glove box assembly.
- Connect one electrical connector on cluster bezel, place in position over retaining slots and firmly snap into place.
- Connect one electrical connector to instrument panel center bezel and install six screws to center bezel.
- Connect one electrical connector to center console, place into position and install eight screws to console.
- Install floor console bezel and parking brake body.
- Install shifter shaft with knob and body.
- Install six alien screws to shifter bezel.
- Connect the battery negative cable.
- Place battery access cover into place and install four bolts.
- Close deck lid.
- Verify vehicle and system operation.