LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Viper >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Instrument Panel Cover/Pad >> Removal

Instrument Panel Cover/Pad: Removal

WARNING: Follow all Warnings for airbag component service (Refer to RESTRAINTS ).
  1. Open deck lid.
  2. Remove four bolts to battery compartment cover and remove cover.
  3. Disconnect and isolate the battery negative cable.
  4. Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or instrument panel component service.
  5. Remove the instrument panel. (Refer to INSTRUMENT PANEL & PAD ASSEMBLY  )
  6. Remove four screws and two electrical connectors to the instrument cluster and remove from panel.
  7. Remove five screws and two electrical connectors to the instrument cluster gauge pack and remove from panel.
  8. Remove two screws and one electrical connector to remote keyless entry module and remove from panel.
  9. Remove two screws and one electrical connector to low tire pressure module and remove from panel.
  10. Remove the right lower instrument panel trim. (Refer to INSTRUMENT PANEL RIGHT LOWER TRIM  )
  11. Remove twelve screws, two bolts, and one electrical connector to instrument panel cover/pad and remove from instrument panel reinforcement.
scientia non olet · About LEMON Manuals