LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Viper >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Instrument Panel Cover/Pad >> Installation

Instrument Panel Cover/Pad: Installation

WARNING: Follow all Warnings for airbag component service (Refer to RESTRAINTS ).
  1. Place instrument panel cover/pad into position and install twelve screws, two bolts, and one electrical connector to instrument panel cover/pad.
  2. Install the right lower instrument panel trim. (Refer to INSTRUMENT PANEL RIGHT LOWER TRIM  )
  3. Install two screws and one electrical connector to low tire pressure module.
  4. Install two screws and one electrical connector to remote keyless entry module.
  5. Install five screws and two electrical connectors to the instrument cluster gauge pack.
  6. Install four screws and two electrical connectors to the instrument cluster.
  7. Install the instrument panel. (Refer to INSTRUMENT PANEL & PAD ASSEMBLY  ).
  8. Connect the battery negative cable.
  9. Place battery access cover into place and install four bolts.
  10. Verify vehicle and system operation.
scientia non olet · About LEMON Manuals