LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Viper >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Cluster Bezel >> Installation

Cluster Bezel: Installation

WARNING: Follow all Warnings for airbag component service (Refer to RESTRAINTS ).
  1. Place bezel in position over retaining slots and firmly snap into place.
  2. Install the three screws along the bottom edge of the bezel next to the steering column.
  3. Install the left speaker cover.
  4. Install the steering column cover. (Refer to INSTRUMENT PANEL STEERING COLUMN COVER  ).
  5. Position the tunnel console back into place and install the eight screws. (Refer to - CENTER CONSOLE - INSTALLATION ).
  6. Install the center bezel. (Refer to INSTRUMENT PANEL CENTER BEZEL  ).
  7. Connect the battery negative cable.
  8. Place battery access cover into place and install four bolts.
  9. Verify vehicle and system operation.
scientia non olet · About LEMON Manuals