Instrument Cluster: Installation

Follow all Warnings for airbag component service (Refer to - RESTRAINTS - WARNING ).

1. Install four screws and two electrical connectors to the instrument cluster.
2. Connect one electrical connector on cluster bezel, place in position over retaining slots and firmly snap into place.
3. Connect one electrical connector to instrument panel center bezel and install six screws to center bezel.
4. Install center console (Refer to - CENTER CONSOLE - INSTALLATION ).
5. Connect the battery negative cable.
6. Place battery access cover into place and install four bolts.
7. Close deck lid.
8. Verify vehicle and system operation.