LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Viper >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures >> Diagnostic Information And Procedures >> Heating & A/C - Symptoms >> Symptom: TX FAILURE (ACTIVE) >> When Monitored and Set Condition:

When Monitored and Set Condition:

When Monitored: When the ignition is on.

Set Condition: This DTC will set if the A/C - Heater Control Module is unable to send a PCI Bus message.