LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rotor (Except SRT-4) >> Installation (Front)

Installation (Front)

  1. Install the brake rotor over the wheel mounting studs and onto the hub.
  2. Install the front disc brake caliper. It may be necessary to retract the brake caliper piston back into the caliper to fit the shoes onto the rotor.
  3. Install the tire and wheel assembly. Tighten the wheel mounting nuts to specification. See TORQUE SPECIFICATIONS .
  4. Lower the vehicle.
  5. Pump the brake pedal before moving the vehicle to set the brake shoes to the brake rotor.
scientia non olet · About LEMON Manuals