LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Removal & Installation >> Pedal >> Removal (With Manual Transaxle)

Removal (With Manual Transaxle)

  1. Remove the instrument panel. See appropriate ANALOG INSTRUMENT PANELS article.
  2. Remove the brake lamp switch.
  3. Disconnect the clutch cable from the clutch pedal spacer. See Fig 1.
  4. Disconnect the wiring harness connector going to the clutch pedal switches. See Fig 2.
  5. Remove the clip securing the power brake booster input rod to the brake pedal. Remove the input rod from the brake pedal.
  6. Remove the 4 nuts fastening the brake pedal bracket to the power brake booster.
  7. Remove the 2 nuts fastening the brake pedal bracket to the instrument panel support.
  8. Remove the brake pedal assembly.
  9. The pedal can be removed from it's bracket by grinding off the peened end of the shaft, removing the shaft, pedal and bushings. A service parts package is available to replace these items.
Fig 1: Disconnecting Clutch Cable (With Manual Transaxle)
G00309413Courtesy of CHRYSLER CORP.
Fig 2: Removing & Installing Clutch Pedal Wiring Harness Connector (With Manual Transaxle)
G00309414Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals