Disc Brake Caliper - Rear (Except SRT-4): Cleaning/Installation
To clean or flush the internal passages of the brake caliper, use fresh brake fluid or Mopar® non-chlorinated brake parts cleaner. Never use gasoline, kerosine, alcohol, oil, transmission fluid or any fluid containing mineral oil to clean the caliper. These fluids will damage rubber cups and seals.
Inspect the disc brake caliper for the following:
- Brake fluid leaks in and around boot area and inboard lining.
- Ruptures, brittleness or damage to the piston dust boot.
- Damaged, dry or brittle guide pin dust boots.