LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Pads/Shoes - Front (SRT-4) >> Removal

Brake Pads/Shoes - Front (SRT-4): Removal

  1. Raise the vehicle.
  2. NOTE: Perform steps  2- 5 on each side of the vehicle to complete shoe set removal.
  3. Remove the front tire and wheel assembly.
  4. Remove the 2 brake caliper guide pin bolts. See Figure.
  5. Remove the disc brake caliper from the disc brake adapter and hang out of the way using wire or a bungee cord. Use care not to overextend the brake hose when doing this.
  6. Remove the brake shoes from the disc brake caliper adapter.