LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Overhaul >> Guide Pin Bushings >> Disassembly & Reassembly

Disassembly & Reassembly

NOTE: Before disassembling the brake caliper, clean and inspect it.
  1. With one hand, push the guide pin bushing sleeve towards the back of the caliper, and at the same time pull the sleeve out of the back of the caliper and bushing.
  2. Using your fingers, collapse one side of the rubber guide pin bushing. Pull the guide pin bushing out the other side of the brake caliper mounting boss.
  3. To reassemble, reverse disassembly procedure.
scientia non olet · About LEMON Manuals