LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Accessory Switch Bezel >> Removal

Accessory Switch Bezel: Removal

  1. Disconnect and isolate the battery negative cable (Fig 1).
    Fig 1: Removing/Installing Battery Negative Cable
    G02653723Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove the instrument panel center bezel. Refer to INSTRUMENT PANEL CENTER BEZEL .
  3. Remove four screws retaining accessory switch bezel.
  4. Disconnect the harness connectors to the following:
    • Rear Window Defogger Switch (if equipped)
    • Cigar Lighter/Power Outlet

    The accessory switches are not serviced separately, but the cigar lighter/power outlet is and must be transferred to the new bezel. Refer to POWER OUTLET REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals