LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior >> Tail Lamp Unit >> Removal

Tail Lamp Unit: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Move trunk lining as necessary from rear closure panel to gain access to back of tail lamp.
  3. Remove nuts attaching tail lamp to the rear closure panel.
  4. Disconnect the wiring connectors and bulbs from unit by twisting bulb counterclockwise.
  5. Remove lamp housing from vehicle.
scientia non olet · About LEMON Manuals