LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior >> Tail Lamp Unit >> Installation

Tail Lamp Unit: Installation

  1. Place lamp housing into position.
  2. Install the bulbs into bulb pockets and rotate clockwise.
  3. Install nuts attaching tail lamp to the rear closure panel.
  4. Reposition trunk lining to rear closure panel.
  5. Connect the battery negative cable.
  6. Verify vehicle and system operation.
scientia non olet · About LEMON Manuals