LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior >> Multi-Function Switch >> Installation

Multi-Function Switch: Installation

  1. The windshield wiper/washer switch must be transferred to the new multi-function switch. (Refer to WASHER SWITCH - INSTALLATION ).
  2. The combination flasher must be transferred to new multi-function switch if replacing.
  3. Install the multi-function switch mounting screws. Tighten multi-function switch to column retaining screws to 3 N.m (27 in. lbs.) torque.
  4. Connect both posi-lock harness connectors at the rear of the multi-function switch.
  5. Instal both upper and lower steering column shrouds. (Refer to UPPER SHROUD - INSTALLATION ).
  6. Connect the battery negative cable.
scientia non olet · About LEMON Manuals