LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior >> License Plate Lamp >> Removal

License Plate Lamp: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove screws attaching license plate lamp to rear bumper fascia (Fig 1).
    Fig 1: Removing License Plate Lamp
    G02654607Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove lamp from bumper fascia.
  4. Remove bulb socket from lamp.
  5. Pull bulb from socket.
scientia non olet · About LEMON Manuals