LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior >> License Plate Lamp Unit >> Removal

License Plate Lamp Unit: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove screws attaching license plate lamp to rear bumper fascia (Figure).
  3. Remove lamp from rear bumper fascia.
  4. Remove bulb socket from lamp.
  5. Remove lamp.
scientia non olet · About LEMON Manuals