Lamps/Lighting - Exterior: Headlamps: Installation
CAUTION:
Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
- Install bulb into headlamp module.
- Install retaining ring to headlamp unit.
- Rotate retaining ring clockwise one quarter turn.
- Connect wire connector to the back of headlamp bulb.
- Place headlamp unit in position.
- Install screws attaching fascia to upper radiator crossmember. If Canadian, Export, or RHD built vehicle, install screws attaching headlamp unit to upper crossmember.
- Connect the battery negative cable.