LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior >> Brake Lamp Switch >> Removal

Brake Lamp Switch: Removal

  1. Disconnect and isolate the battery negative cable from its post on the battery.
  2. Under the instrument panel, remove the brake lamp switch by rotating the switch in a counterclockwise direction approximately 30 degrees and pulling it out of the bracket.
  3. Disconnect the wiring harness from the connector on the switch.
  4. Discard the brake lamp switch. It must not be reused. 
scientia non olet · About LEMON Manuals