LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> SX R/T >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior >> Backup Lamp Switch >> Installation

Backup Lamp Switch: Installation

    CAUTION: Do not overtighten switch.
  1. Install back-up lamp switch. Teflon tape or equivalent must be used on switch threads. Tighten switch to 24 N.m (18 ft. lbs.) torque.
  2. Connect back-up lamp switch connector (Figure).
  3. Lower vehicle.
  4. Verify back-up lamp operation.
scientia non olet · About LEMON Manuals