LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Front Suspension - 4WD Torsion Bar) >> Removal & Installation >> Stabilizer Bar >> Removal

Stabilizer Bar: Removal

WARNING: This page is about a different variant/trim than selected.

Raise and support vehicle. Remove stabilizer bar retainer nuts, bolts from lower control arms and frame crossmember. Remove stabilizer bar. Remove bushings from stabilizer bar as necessary.

scientia non olet · About LEMON Manuals