LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (HVAC - Airflow Distribution) >> Blower Motor >> Installation

Blower Motor: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align and install the blower motor into the HVAC housing.
  2. Install the three screws that secure the blower motor to the HVAC housing. Tighten the screws to 2.2 N.m (20 in. lbs.).
  3. Connect the wire harness connector to the blower motor.
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals