Mode Door Actuator: Description

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

The mode door actuator is a reversible, 12-volt Direct Current (DC), servo motor. The single mode door actuator is located on the driver side end of the HVAC housing, on the distribution housing. The mode door actuator is mechanically connected to the mode cam.

The mode door actuator is interchangeable with the actuators for the blend-air door and the recirculation-air door. Each actuator is contained within an identical black molded plastic housing with an integral wire connector receptacle. Two integral mounting tabs allow the actuator to be secured with two screws to the distribution housing. Each actuator also has an identical output shaft with splines that connects it to the linkage that drives the mode door. The mode door actuator does not require mechanical indexing to the mode door linkage, as it is electronically calibrated by the A/C-heater control.