LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Air Conditioning Controls) >> Ambient Temp Sensor >> Installation

Ambient Temp Sensor: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the ambient temperature sensor onto the radiator yoke.
  2. Install the screw that secures the ambient temperature sensor to the radiator yoke. Tighten the screw to 5.6 N.m (50 in. lbs.).
  3. Connect the wire harness connector to the ambient temperature sensor.
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals