LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Overhaul - 42RLE Automatic Transmission) >> Transmission Range Sensor >> Installation

Transmission Range Sensor: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the TRS to the manual shaft. Make sure TRS locating pin rests in manual valve bore slot.
  2. Install the TRS/manual shaft retaining screw and torque to 5 N.m (45 in. lbs.) torque.
  3. Install the manual shaft seal.
  4. Install valve body to the transmission.
    Fig 1: Installing Manual Shaft Retaining Screw
    G03489331Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals