Solenoid/Pressure Switch ASSY: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If the Solenoid/Pressure Switch Assembly is being replaced, the Quick Learn Procedure must be performed.Refer to STANDARD PROCEDURE--DRIVE LEARN .

Raise vehicle on hoist.
Remove valve body assembly from transmission. (Refer to REMOVAL )
Remove Solenoid/Pressure Switch Assembly retaining screws from solenoid ( Fig 1).

Fig 1: Removing Solenoid Retaining Screws
Courtesy of DAIMLERCHRYSLER CORP.
Remove Solenoid/Pressure Switch Assembly and screen from valve body ( Fig 2).

Fig 2: Removing Solenoid/Pressure Switch Assembly And Screen
Courtesy of DAIMLERCHRYSLER CORP.