LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Overhaul - 42RLE Automatic Transmission) >> Extension Housing Seal >> Installation

Extension Housing Seal: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place seal in position on overdrive housing.
  2. Drive seal into overdrive housing with Seal Installer C-3995-A ( Fig 1).
  3. Carefully guide propeller shaft slip yoke into housing and onto output shaft splines. Align marks made at removal and connect propeller shaft to rear axle pinion yoke.
    Fig 1: Installing Transmission Housing Seal
    G03489224Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals