TEST TWO-SELECTOR IN DRIVE (Second Gear)
WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This test checks the underdrive clutch hydraulic circuit as well as the shift schedule.
- Attach gauge to the underdrive clutch tap.
- Move selector lever to the 3 position.
- Allow vehicle wheels to turn and increase throttle opening to achieve an indicated vehicle speed of 30 mph.
- In second gear the underdrive clutch pressure should read 110 to 145 psi.