LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Overhaul - 42RLE Automatic Transmission) >> Automatic Transmission - 42RLE >> Diagnosis And Testing >> Diagnosis And Testing - Hydraulic Pressure Tests >> TEST ONE-SELECTOR IN L (1st Gear)

TEST ONE-SELECTOR IN L (1st Gear)

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This test checks pump output, pressure regulation and condition of the low/reverse clutch hydraulic circuit and shift schedule.
  1. Attach pressure gauge to the low/reverse clutch tap.
  2. Move selector lever to the L position.
  3. Allow vehicle wheels to turn and increase throttle opening to achieve an indicated vehicle speed to 20 mph.
  4. Low/reverse clutch pressure should read 115 to 145 psi.
scientia non olet · About LEMON Manuals