LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Power Steering Pump) >> Pump >> Installation - Power Steering Pump

Installation - Power Steering Pump

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the pump with the mounting holes in the left cylinder head.
  2. Install 3 pump mounting bolts through the pulley access holes. Tighten the bolts to 28 N.m (21 ft. lbs.).
  3. Install the oil cooler to the pump bracket if equipped. Install the oil cooler mounting bolt.
  4. Install the pressure line and return hose to the pump. Tighten the pressure line to 35 N.m (25 ft. lbs.).
  5. Install the serpentine drive belt, (Refer to ACCESSORY DRIVE ).
  6. Fill the power steering pump, (Refer to STANDARD PROCEDURE  ).
scientia non olet · About LEMON Manuals