Installation - Pressure Hose
WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Install the pressure hose to the vehicle.
- Reconnect the pressure hose at the gear. Tighten the hose to 31 N.m (23 ft. lbs.).
- Reconnect the pressure hose at the pump. Tighten the hose to 31 N.m (23 ft. lbs.).
- Remove the support and lower the vehicle.
- Refill the power steering system,(Refer to STANDARD PROCEDURE ).