LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Wiper System & Washer System) >> Washer Nozzle >> Removal

Washer Nozzle: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove both wiper arms from the wiper pivots. (Refer, to WIPER ARM  ).
  2. Unlatch and open the hood.
  3. Remove the cowl plenum cover/grille panel from over the cowl plenum. (Refer to COWL GRILLE ).
  4. From the underside of the cowl plenum cover/ grille panel, disconnect the washer nozzle hose from the barbed nipple of the washer nozzle ( Fig 1 ).
    Fig 1: Identifying Front Check Valve/Washer Nozzle Remove/ Install
    G03488591Courtesy of DAIMLERCHRYSLER CORP.
  5. From the underside of the cowl plenum cover/ grille panel, release the integral snap features of the washer nozzle and push the nozzle out through the mounting hole toward the top side of the cowl plenum cover/grille panel.
  6. Remove the washer nozzle from the top of the cowl plenum cover/grille panel.
scientia non olet · About LEMON Manuals