LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Lamps & Lighting - Interior) >> 2ND Seat Dome/Reading Lamp Bulb >> Installation

2ND Seat Dome/Reading Lamp Bulb: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the bulb to the bulb holders within the dome/reading lamp housing ( Fig 1 ).
  2. Press the bulb firmly and evenly into the bulb holders until it snaps into place.
  3. Swing the notched end of the lamp lens up into position against the lamp housing, then press upward on the lens firmly and evenly until it snaps into the housing.
  4. Reconnect the battery negative cable.
    Fig 1: Positioning Bulb Holders Within Dome Lamp Housing
    G03488568Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals