LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Lamps & Lighting - Exterior) >> License Plate Lamp Unit >> Installation

License Plate Lamp Unit: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position lamp in bumper and press into place.
  2. Install license plate lamp bulb socket.
  3. Connect the battery negative cable.
scientia non olet · About LEMON Manuals