Headlamp Unit: Removal
WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove the bolts attaching headlamp to the inner fender panel ( Fig 1 ).
- Grasp the headlamp and firmly pull the headlamp to disengage it from the panel.
- Disengage the connector from the headlamp bulb.
- Separate bulb from headlamp.
- Remove the bulb sockets from the front park/turn signal/side marker lamps.
- Separate headlamp module from vehicle.