LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Lamps & Lighting - Exterior) >> Headlamp Switch >> Installation

Headlamp Switch: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIR BAG RESTRAINT SYSTEMS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
  1. Position the headlamp switch to the cluster bezel.
  2. Install and tighten the screws that secure the headlamp switch. Tighten the screws to 2.2 N.m (20 in. lbs.).
  3. Reconnect the wire harness to the headlamp switch.
  4. Install the cluster bezel onto the instrument panel (Refer to CLUSTER BEZEL ).
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals