LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Lamps & Lighting - Exterior) >> Brake Lamp Switch >> Installation

Brake Lamp Switch: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press and hold brake pedal down.
  2. Align tab On new  switch with notch in switch bracket. Then insert switch in bracket and turn it clockwise about 30° to lock it in place.
  3. Connect harness wires to switch.
  4. Release brake pedal.
  5. Move the release lever ( Figure ) on the switch to engage the switch plunger. The switch is now adjusted and can not  be adjusted again.
scientia non olet · About LEMON Manuals