Service 4WD Indicator: Description
A service 4WD indicator is standard equipment on all instrument clusters ( Fig 1 ). However, on vehicles riot equipped with the optional four-wheel drive system arid electronically shifted transfer case, this indicator is electronically disabled. The service 4WD indicator is located in the Information Center area of the instrument cluster, to the right of center. The service 4WD indicator consists of a stencil-like cutout of the words "SERVICE 4WD" in the opaque layer of the instrument cluster overlay. The dark outer layer of the overlay prevents the indicator from being clearly visible when it is not illuminated. An amber Light Emitting Diode (BED) behind the cutout in the opaque layer of the overlay causes the "SERVICE 4WD" text to appear in amber through the translucent outer layer of the overlay when the indicator is illuminated from behind by the LED, which is soldered onto the instrument cluster electronic circuit board. The service 4WD indicator is serviced as a unit with the instrument cluster.