LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Instrument Cluster) >> Instrument Cluster >> Disassembly >> Cluster Lens And Hood

Cluster Lens And Hood

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument cluster from the instrument panel. (Refer to REMOVAL  ).
  3. Remove the seven screws around the outer perimeter of the cluster that secure the lens and hood unit to the cluster housing ( Fig 1 ).
    Fig 1: Removing Instrument Cluster Components
    G03488512Courtesy of DAIMLERCHRYSLER CORP.
  4. Gently pull the lens and hood unit away from the cluster housing.
    CAUTION: Do not touch the face of the gauge overlay or the back of the cluster lens with your finger. It will leave a permanent finger print.
scientia non olet · About LEMON Manuals