LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Instrument Cluster) >> Instrument Cluster >> Assembly >> Cluster Housing Rear Cover

Cluster Housing Rear Cover

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the rear cover onto the back of the cluster housing ( Figure ).
  2. Install and tighten the six screws that secure the rear cover to the back of the cluster housing. Tighten the screws to 2.2 N.m (20 in. lbs.).
  3. Reinstall the instrument cluster onto the instrument panel. (Refer to INSTALLATION  ).
  4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals