LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Battery System) >> Thermal Guard >> Installation

Thermal Guard: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean and inspect the battery thermal guard. Refer to BATTERY SYSTEM CLEANING  for the proper cleaning procedures, and Refer to BATTERY SYSTEM INSPECTION  for the proper inspection procedures.
  2. Carefully and evenly slide the battery thermal guard down over the battery case.
  3. Install the battery and the battery thermal guard into the battery tray as a unit. Refer to BATTERY  for the proper battery installation procedures.
scientia non olet · About LEMON Manuals