LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Engine Cooling System) >> Engine Coolant Temperature Sensor >> Installation

Engine Coolant Temperature Sensor: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install sensor.
  2. Tighten to 11 N.m (8 ft lbs.) torque.
  3. Connect electrical connector to sensor.
  4. Replace any lost engine coolant (Refer to STANDARD PROCEDURE - REFILLING COOLING SYSTEM ).
scientia non olet · About LEMON Manuals