The On-Board Diagnostic System

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

The CAB monitors the antilock system. The CAB monitors critical input and output circuits for correct operation.

Some circuits are tested continuously; others are checked only under certain circumstances.

Each circuit malfunction detected by the CAB has a corresponding trouble code:

If the CAB diagnostic system senses that one of the circuits is malfunctioning, it stores the corresponding trouble code in memory
If the malfunction goes away after the trouble code is stored, the trouble code will be erased after 50 key cycles, so long as no other DTC's were set within these 50 cycles

Refer to DIAGNOSTIC INFORMATION AND PROCEDURES for system malfunctions diagnosed in this article.